Posted on Wednesday 21 April, 2010 by Barbizon Lighting
http://www.antonbauer.com/Home Anton Bauer introduced the Dionic HCX at NAB. Not only does the Dionice HCX have a 120 watt-hour capacity, they also have a unique, built-in motion detection sensor. After a two-week period without a load, the DIONIC HCX automatically goes into “deep sleep,” significantly reducing self-discharge and allowing extended storage with nearly zero capacity loss. To “awaken” the battery for normal use, customers need only move the battery, thus activating the motion detection feature and as a result, “wake up” the battery. This new motion detection feature significantly increases the overall life of the battery by mitigating lithium-ion battery self-discharge when the battery is not in use. Anton/Bauer also has plans to integrate the DIONIC HCX with its signature Anton/Bauer Battery Management System (AB-BMS), which, in the future, will allow users to program the inactivity time length prior to the battery “going to sleep,” further allowing the customer to tailor their battery systems to their specific needs. Weighing just 2.4 pounds (1.09 kg), the DIONIC HCX is capable of withstanding high instantaneous current draws in addition to 10 amp sustained current draws. The DIONIC HCX can power a 40 watt camera with a 20 watt light for over two hours – making it a good choice for users working with on-camera lighting applications requiring a high current draw. In addition, the DIONIC HCX offers an enhanced LCD RealTime® fuel gauge. Users can now quickly and easily check their run-time, with the display showing up to nine hours of run-time when used under low-power load conditions. The new LCD display clearly indicates remaining run-time and battery capacity, showing the number of hours available with a seven segment display surrounded by arcs indicating 15 minute intervals. A battery “gas gauge” indicator also shows remaining capacity in 20 percent intervals underneath the remaining run-time indicators.