Barbizon Lighting Company Captcha Code Generator

CATEGORY: LDI 2018


Displaying 1 to 62 (of 76 Posts)
 1  2  Next → 

A LDI 2018 Show Report


Check out a comprehensive list of items we saw at the 2018 LDI Show held in Las Vegas Oct 19-21.


If you'd like more information on the products posted here, or if you saw something you think we missed or that needs updating - contact us by emailing:

more@barbizon.com.

AC Lighting

Follow-Me is a cost-effective Art-Net based calibration software package that utilizes moving lights as follow-spots. Not only can Follow-Me be used to follow one or more performers with multiple moving heads but individual fixture selection offers the additional functionality of preset positioning for solo’s and surprise performances. Follow-Me offers a range of advantages over traditional follow spot usage. Lower labor costs, freedom in lamp positioning, improved follow-spot angles, eliminating kill seats, offering accurate timing for color bump cues, following performers with gobo effects or color chases. Follow-Me also solves weight issues on smaller roofs where typical truss seats Inc. operators are too heavy or deep to implement. Follow-Me benefits lighting designers- technical producers and event planners anywhere performers require illumination and is easily implemented on touring productions, festival stages, TV studios, and concert halls.

Vista EX- The Vista EX is a control surface that provides large amounts of physical control within a compact footprint, capable of delivering small to large-scale shows. Easy to use. Great for selling to churches, schools, colleges.

Key features:


  • 12 playback faders

  • 60 assignable buttons

  • 8 encoders

  • Dedicated master cuelist playback controls

  • Grand Master intensity fader

  • 12 user keys

  • 4 function keys

  • Unlimited pages

  • 2 physical DMX outputs


AC was also highlighting their new ProLights fixture line.

The breaks the limits of LED technology applied into ellipsoidal fixtures, offering a full spectrum chromatic reproduction and keeping high color consistency, as well as a precise white emulation from Tungsten to Neutral White tones. ECLIPSE FC features a RGB + Lime Green light source, in order to increase the lumen output in white tints and complete the color rendering with colors that were not reachable with luminaires of previous generations.

ECLIPSE FC is an exceptional multi-purpose workhorse to be applied everywhere, offering colors, white reproduction, and high brightness all in one fixture.

From their Chroma Q line, theBrute Forceis a new fixturethat is fully dimmable and utilizes multiple Chroma-Q Studio Force II engines.

The 48” length tuneable white battens with an extended CCT range between 2,000K and 10,000K and each unit features 96-way mappable pixel control with RDM, DMX and optional wireless operation.

  • LED outdoor / effects lighting

  • Realistic LED alternative to the traditional quarter ‘Wendy’ light

  • Significantly reduced energy consumption

  • No downtime due to lamp failures

  • Produces tuneable whites, as well as pastel and saturated colors (2,800K - 6,500K / 2,000K - 10,000K extended CCT)

  • 96-way pixel mapping to generate ‘effects’ - e.g. fire & lightning

  • Full creative control from a lighting desk or media server


https://www.aclighting.com

Airstar



Airstar America continues to manufacture high quality small-medium sized lighting balloons. Across three different departments (Event, Film, Safety) they provide LED, Tungsten, and HMI sources for a variety of different shapes and sizes. Debuting this year are the new NEO line. 16.4’ Long, 8.4” Diameter lighting tubes. Available in both Cool White and RGBW, they can be connected together to create complex shapes, or used separately, creating visual lines that radiate light.

http://www.airstar-light.us/airstar/

Altman Lighting

Altman had their new AP-150-RGBW LED Par at LDI this year. The AP-150 is a compact, lightweight 135 Watt RGBW LED par wash light that is packed with a high feature set at an affordable price. This compact par weighs in at just 11 pounds / 5.08 kg. The AP-150-RGBW offers a number of different controls from 8 Bit, 16 Bit, RGB, and HSIC, modes allowing for a number of control choices.

Factory and custom color presets round out the AP-150-RGBW’s feature set allowing for a quick selection of factory preloaded White set points and the most widely used entertainment color choices. Also adds the ability to record color presets from the DMX controller directly to the fixture for custom color playback.



https://www.altmanlighting.com

American DJ

ADJ had a couple of IP rated fixtures to add to the mix:

The 32 HEX Panel IP (also the 32 HEX Panel IP Pearl) is an IP65 rated wash/blinder fixture with 32 12w HEX LEDs. This RGBWAUV fixture has the ability to pixel map over 8 zones and has a beam angle of 24 degrees. The HEX Panel includes a removable filter frame and a magnetic diffuser.



Similarly, in the HEX family, the 7P HEX IP has the same colors as the 32, with only 7 12watt LEDs. This Par fixture has a 30-degree beam angle and communicates over 3 pin DMX.

In the non-IP rated fixtures, we start with the Hydro Beam X2, with a beam angle of 3 degrees, is a moving head fixture with a 370W LL discharge lamp with 10 colors plus color correction at 3200K and 5600K and open white. It features 8 gobos (5 glass, 3 metal) and three gobo reducers, all fully rotating. Also included in this fixture is an 8 facet circular prism and an 8 facet linear prism.

The Par Z Move is a 200W warm white LED wash unit with a zoom range of 9-43 degrees. This fixture communicates over 3 Pin and 5 Pin DMX and has an external diffuser slot.

ADJ COB Cannon WashThe COB Cannon Wash ST is a 150watt RGBA LED fixture with an 80-degree beam angle. This fixture is similar to the Wash DW, just shorter. It includes a lens kit to convert the beam angle to either 40 degrees or 50 degrees. Communication is done over 3pin or 5pin DMX and weighing only 9 pounds, its light output at 2 meters is a stunning 1970 LUX.

The Par ZP120 RGBW fixture is similar to the previously released ZP120, with now the added function of color! This modern par can has a 115w quad COB LED, output comparable to a 1000w par. Inside the housing, there is an adjustable slider for beam angle control from 7 to 25 degrees. Another great feature is that it includes 64 color macros for easy manual plug and play operation.

www.adj.com

Antari

At this year’s show, in addition to their standard line of foggers and hazers, Antari displayed their new low fog generator –the DNG-250. Compared to its previous version (DNG-200), the DNG-250 has been upgraded to a more powerful heating element and more efficient refrigerationsystems. This helps it to produce a higher volume of fog and achieve even better low fog effects.


http://www.antari.com/

Apollo Design Technology

Apollo Design Technology showed their new line of SuperResolution® Gobos that double the resolution below 50mm providingblack & white or grayscale photographs or graphics with intricate detail. Apollo recently posted a video explaining the improvements.



https://www.apollodesign.net/

Arri

Arri StellarARRI has introduced their new lighting control app called Stellar. It is compatible with L-Series and SkyPanel fixtures and connects wirelessly through SkyLink. The user interface is intuitive and easy to use. The app uses RDM to automatically discover and address ARRI fixtures. You can import a light plot diagram, group fixtures, and store scenes. The app is $99.99 yearly and works with iPhones (5.5” and up) and IPads (9.7” and up) and IOS 11 and up.


http://www.arri.com/lighting/led/

Astera

Astera Titan TubeTitan Tube was specially designed for the Film, Broadcasting and Cinema industries. Optimized for an ultra-high TLCI, a very high CRI and peak brightness, colors as well as Hue, Saturation and Intensity can be set directly on the tube. The Titan Tube accepts both wireless and wired DMX via a special power/data combination cable. Each Titan Tube has 16 individually controllable pixels. LED emitters offer a range of Tunable White from 1,750K to 20,000K. Within that range, users will find Ultra High Color Rendering with a TLCI =96, CRI =96, CRI Re=90 from 3200K to 6500K. A display on the back provides access to DMX setup, colors, hue, saturation, and intensity control.

Check out the entire line of compact wireless battery operated LED Pars including AX3 Lightdrop, AX5 Triple Par, and AX10 SpotMax at www.astera-led.com

Avolites

Avolites was highlighting their Titan V11 Software upgrade at LDI including the Titan v11 Remote App.

The Titan Remote works alongside your Avolites Titan lighting console to provide moving light control from your iPhone, iPod Touch or Android device.
To use the Titan Remote you must have an Avolites Titan console connected to your device via a WiFi network. Titan Remote V11 works with any Titan Console running Titan Version 11 to connect to consoles running older Titan versions use the corresponding Titan Remote app.

Using this app you can connect to a console, Titan Mobile or Titan One PC and carry out the following functions:
· Select and control fixtures
· Modify fixture attributes such as Dimmer, Pan or Tilt
· Apply Palettes
· Create and update palettes
· Play Cues
· Command style fixture selection and intensity control
· Quick Sketch Legends
· View DMX Address Patch

Any number of Titan remotes can be connected to a console and another lighting designer can work on the console while the remote is in use. The remote is easy to use as the screens look and feel like the full Avolites consoles with the same buttons and workflow as the console.

Avolites was also showing the power of the new AI media server v10 that is packed with new features like:


  • AiM Codec

  • A Fully Re-designed Timeline

  • Projectivekeystone,known as 'mesh-warp'.

  • Gridwarp on screen outputs

  • BPMSync

  • Spout and8HDSDI Inputs

  • Notch support

  • NDI(Network Device Interface by NewTek)




https://www.avolites.com

Ayrton

Ayrton displayed their recently launched Bora™S and Khamsin™S fixtures, along with previewsof their new Diablo™S, Diablo™TC, Merak™S, and Merak™TC automated fixtures.

TheBora™Sis a new high output, low power LED wash light, complete with gobo projection and framing capabilities. Its optical efficiency delivers an output of 38,000lm from an 8000K white LED engine using just 750W. Ideal for large-scale venues, outdoor and indoor arenas, it features a 178mm PC front lens, 8:1 zoom delivering a beam range of 8° to 64°, full field framing, iris, rotating gobo wheel, two colour wheels, and full CMY + CTO colour system with a CRI greater than 70.

The Khamsin™S automated LED profile spotlight outputs massive 39,000lm, using the same 750W white LED engine as Bora-S. Features include two rotating gobo wheels, an animation wheel, full field framing, two prisms, iris, two frosts, one fixed color wheel, and a full CMY + linear CTO color system, plus a 9:1 zoom with a 6.5° to 56° beam range.

TC versions of both Bora and Khamsin with TM30 results over 90 are available on request so customers can choose between the “TC-version” (True Colour) with high color rendering performance, or opt for maximum output with the “S-Version” (Stage).



Diablo™TCandDiablo™S are due for release early 2019, Diablo-TC offers a 14,000-lumen output calibrated at 7000K with a CRI greater than 90; the high output version, Diablo-S, offers a 17,000-lumen output, 8000K white light source and a native CRI greater than 70. Both models have 8:1 zoom optics giving 6.7° to 53° beam range; sophisticated CMY color mixing, variable CTO, a fixed color wheel with 7 complementary colors, an indexable rotating gobo wheel with 7 glass gobos, a graphic animation wheel, iris, frost, and full framing system. Power consumption is just 300W.

Merak™TCandMerak™S wash luminaires were also previewed. Small in size, Merak-TC outputs 13,000 lumens from a 300W, 7000K white source and has a greater than 90 CRI. Merak-S is the high output version of Merak-TC and delivers a 16,000-lumen output from its 300W, 8000K source which aligns it with an 800W/1000W discharge fixtures.

Here's a video of their LDI 2018 presentation.



https://www.ayrton.eu/

Barco

Barco came to LDI with some big, bright new projectors.

BARCO’s XDL-4K75 projector is a 75,000 lumens, 4k, 3-chip DLP RGB laser large venue projector. It features REC 2020 colors, signal flexibility up to 120 Hz, and reduced installation time through zero alignment. It’s compatible with existing Barco XLD+ lenses and has an expected lifetime of 20,000 hours. At the show, they featured a custom PRG rig for the unit, allowing for different installation positions.

Barco’s UDX-4k32 projector is a 31,000 lumens, 4k UHD, 3-chip DLP laser phosphor large venue projector. The projector’s Constant Light Output (CLO) functionality also guarantees peace of mind by providingconstant brightness and colorover time. The unique FLEX² feature will allow you to tune and lock your brightness and resolution to a specific show. You'll now need fewer projectors to cover a wider range of brightness levels and resolutions.

At the show, this projector was paired with Barco’s TLD+ lens 90 degree Ultra Short Throw. This lens is exclusively designed to be used on the Barco projector series UDX, HDX, and HDF. The lens output is 90° turned. This allows an optimal use of the vertical shift range when projecting to the left seen from the rear side of the projector. This lens is designed for ultra short throw video performance. Lens shift +/-150%, depending on projector type.

https://www.barco.com/en/products/projectors

Baxter Controls

Best Boy 2Baxter Controls, the creator of the Pocket Console, rolls out the new Best Boy 2. The Best Boy 2 that has all the same features of the Best Boy but is lighter, waterproof, and is $200 less than the original Best Boy.

The BB2 is similar to the Best Boy in that it has the Pocket Console enclosed in the plastic carrier. The box has been redesigned to allow the 9V battery to be accessed without needing to open the Pocket Console enclosure. The case also holds the power adapter to allow the console to be powered via 120VAC power.

https://dmx2go.com/

BB&S Lighting



BB&S introduced the Area 48 color this year at LDI this year. The Area 48 color uses 150 watts and 12,000-lumen output as well as delivers stunning saturated and tinted colors and clean white light in both ends of the spectrum with high CRI.

The Area 48 color is color tweaking with white LEDs ( bicolor ) and in addition to that, RGB has been added.

Area 48 color has an onboard touch screen for local control and of course, runs on DMX / RDM as well.

There is a full range of DOP choice softboxes, snap grids and diffusers available for the Area 48 color.

Features are:
– High CRI all through the white range
– Full (light) power in 5600K and 3200K
– RGB + white + white
– Excellent for strobing
– Lightweight
– Compact
– High-quality LEDs with extreme binning system
– White light range between 1800 and 10.000 Kelvin.
– Plus / minus green, plus/minus magenta setting.
– excellent dimming 16 bit from 0,001% to 100 %
– Totally flicker-free, can be used for real high-speed shoots.
– Superfast synced strobe

https://www.bbslighting.com/

Blizzard Pro

Blizzard rolled out four new fixtures in theirWilly Wonka-themed booth at LDI.

The N-Trance is a moving head fixture with a direct view ring of LEDs on the front edge to enhance the visual impact of the unit. N-Trance's 90W white 7000k LED sports a narrow 2deg beam and the fixture's LED Ring sports bling with 86pcs of direct view RGB LEDs with Full pixel mapping capabilities

The Super G 150is a150W 7500K color temp main beam with a12deg projection angle. It has a 7 color + white color wheel, 1 static gobo wheel w/ 7 gobos, 1 rotating gobo wheel with space for 6 gobos, 3 facet prism, and can operate in auto and sound activated modes.

Blizzard also introduced the Red Stone line of fixtures. The 440 Profileis a framing CMY moving headwith a 440W 7500K cool white LED engine, full CMY color mixing, and a linear CTO color correction. There is also a7 color + open color wheel w/ half colors7 glass gobo + open. For accurate beam control, there are 8 blade framing shutters, Iris and for effects, there is a rotating prism plus frost filter.

To cut down on wires the 440 has built-in Wireless DMX , and wiredDMX, RDM, Art-NET.

There was also the 240WZ Wash moving head with RGBW LEDs, a zoom range of5deg – 70deg, rotating prism beam effects, and5 dimming modes w/ 4 dimming curves.

Like the other Red Stone fixtures, it has wireless DMX and wired DMX, RDM, Art-NET.

https://www.blizzardpro.com/

Canto USA

RETRO-Passive fixtures that go from 0-100% phase dimmable (forward and back) variable wattage LED 2700K-5000K, 80-97 CRI engine designed for SCR, TRIAC, or IGBT dimmers. It has been designed with a fanless light engine is a direct replacement of existing incandescent lamps in a wide range of applications. Specific socket adapters enable simple installation which can be as easy as changing a light bulb in most applications. They come in E26, E39, PAR56, PAR64 bases, and custom sizes, mounts, and for all applications.

The Retro line is a CSA listed, Energy Star 2.0 retrofit kit that quickly transforms existing inefficient incandescent fixtures into energy efficient LED fixtures. The patented technology allows the fixture to smoothly dim from 0-100% utilizing existing dimming technology. Retrofit kits are available with a variety of options for both recessed and pendant style fixtures. Installation is as easy, and the LED technology creates even fields and delivers consistent color.

The Tango is the latest addition to the line of followspots. The Tango is very lightweight that can be carried by one person. The LDR’s new long-throw fixture comes in 1200, 1500, or 2000 MSR uses the Philips Fast Fit (FF) lamp. The fast fit lamp is a rear or side-loaded system that allows the fast replacement of the lamp with no tools required. Accessories include the iris diaphragm and seven-disc color changer, plus HD tripod stand with bearing mount for stable and smooth operation. Great for schools, universities, professional theater, touring and houses of worship.

CAST Software

The team at CAST Software has been working on Black Trax for 10 years and their efforts have really paid off. The new Black Trax server is loaded with features that can be used in every production environment. Black Trax uses motion capture cameras to detect light pulses from tiny infrared beacons. The Black Trax Server uses these pulses to calculate the exact location of the subject in a 3D environment. This information can then be transmitted to all kinds of external devices such as: moving lights, audio systems, Pan Tilt Zoom Cameras, gaming consoles, and media servers. The end result is the ability to seamlessly incorporate all of these products into one spectacular high tech performance.



https://cast-soft.com/

CBI

This year CBI had a full range of their cable products on display. Cables of note on display were the Cat6 snake where each channel is individually shielded. This offers a lot of flexibility since you can choose how many universes to carry on the line. Their line of Cat5E cable boasts being built to all the Cat6 specifications except for the jacketing, giving it more the feel of a traditional audio cable. The always useful MTPD line of cables, combining power and data, was there with jacketed and unjacketed versions. Another place their cable was “on display” was the MT4 Cat6 shielded cable used for control in the outdoor control booth.

http://www.cbicables.com

ChamSys

Chamsys, a sister company to Chauvet Professional unveiled their new Quick Q series control desks. Unlike the previous Chamsys consoles, these consoles are designed for easy use, easy setup and high affordability. The Quick Q comes in three sizes: Quick Q 10, Quick Q 20, and Quick Q 30.

Chamsys QuickQ20The Quick Q10 single universe console comes with a 9.7” touchscreen, 5pin XLR and a network port for DMX communication, 20 fixture faders, two encoders for Hue/Saturation control, 2 USB ports, 1/8” jack for an audio interface, a single Grandmaster, two master faders and a cue stack fader. Other features include a full-color wheel, communication over sACN, ArtNet, and Pathport. The console does allow one external touchscreen monitor and includes visualizer software for easy visualization of programming. This console also allows the ability to connect any smartphone or tablet over WiFi for handheld operation.

The Quick Q20 is similar to the 10, however with the addition of a second universe, 4 attribute encoders, and 10 multiple function playbacks, it is designed more for the use of moving light programming.

Finally, the Quick Q30 tops off the line with a 4 universe, 3 5Pin XLR ports, 40 fixture faders, a fader for intensity control, and full MIDI and MIDI timecode support.

All three of these consoles have a scheduled availability of December 2018.

<ahref="https://www.w3schools.com/html/">chamsyslighting.com</a>

Chauvet Professional

Chauvet Professional introduced new IP65 related fixtures. The Maverick Storm 1 Wash presents itself with a blasting output of 6,000 lumens, which makes it brighter than the Rogue 2 fixture. The RGBW fixture with its stunning aerial effects, effective pixel mapping feature, and a large variety of gobos makes it a great fixture for outdoor events. With an 11 degree to 42-degree zoom, it is sure to successfully light up any size event or show.

Continuing with the IP65 fixtures, Chauvet Professional has also released the WELL Pad; a completely wireless, battery-powered up-light. This RGBA fixture communicated over W-DMX and easily stores in a drop-in case for easy recharging—6 hours to recharge for 9 hours of use at full output. A magnetic diffuser included with the fixture increases the beam angle from 22 degrees to 27 degrees. These fixtures like the previous WELL products are sold in multiples—4 units with the charging case.

With the increasing use of LED tape, Chauvet Professional has released their IP67 rated version called the EPIX Flex 20. This 5-meter strip operates with the EPIX Flex Drive, which can control up to 8 EPIX Flex strips. With the additional ability to pixel-map, this highly flexible and extremely customizable strip is sure to be a competitor in the market. It includes 10 sets of mounting brackets and screws and a termination kit.

Also drawing widespread interest were the new collection of Ovation products, including 6-inchOvation Fresnels (the RGBA-LimeOvation F-415FC, theOvation F-415VW, and theOvation F-145WW), as well as four new pars:


www.chauvetprofessional.com

Cineo Lighting

Cineo introduced the Lightblade, created in partnership with NBCUniversal. Available in 24” and 48” lengths, these 2.5” wide LED fixtures offer a thin and low profile footprint for even the tightest nooks and corners of your TV and Movie sets. The modular, integrated mounting system allows gaffers and electricians to stack several lightblades together, offering as a single integrated light source, or independently for a multitude of diverse effects. The new Lightblade LB800 is Cineo/NBCUniversals new 2’x4’ aperture panel type fixture, offering an incredible 50,000 lumens with an 800 watts worth of LED inside. With White-phosphor LEDs and Phosphor-converted saturated RGB LEDs deliver consistent color across a broad spectrum, and feature both HIS and RGB control modes. The LB800 can also be controlled in up to 10 independent zones via DMX, with configurability via RDM. New users won’t be disappointed, as the LB800 features the same intuitive graphic user interface for control.

https://www.cineolighting.com/

CITC Special Effects

CITC was celebrating 28 years of business with the new owners of the company Paul de la Port and Jason Wilbur.Gary and Stephany were also on hand with the wide array of special effects products the company is known for including their recently released Maniac II.

Features:





  • 15 Second SmartFog creates cryogenic or fire effects

  • Fully automated moving head

  • 24 LED lights

  • 10 DMX channels

  • Adjustable output and speed

  • Instant stop technology

  • Strobe, dim, mix colors

  • Mount upright or upside down

  • Sound activation

  • Multi-Function Controller allows use without DMX


http://www.citcfx.com

City Theatrical

Just in time for this year’s show, City Theatrical released their new Multiverse. With the growing issues with wireless frequencies (and several other daily challenges), they have answered with the Multiverse Module. The goal was more data using less radio energy, and they succeeded. This module offers flexibility, scalability, easy use, 2.4GHz, and 900MHz frequencies, and backward compatibility. Depending on your needs/ multiverse components, you can go from one universe of control to ten universes. The Multiverse product line includes the Multiverse SHoW Baby, Multiverse Node, Multiverse Transmitter, and Multiverse Gateway. Worth noting is the Multiverse Transmitter and Multiverse Gateway have the DMXcat onboard to allow for user setup.

And if wireless control advancements weren’t enough, the QolorFlex line now has a new addition with the NuNeon. This is a sealed LED linear product that easily replaces neon lighting with is extreme flexibility and safety. This is ETL listed, RGB color mixing, and operates on 24VDC. It works with a variety of the QolorFLEX dimmers and power supplies and can easily installed with accessories specifically for the NuNeon. The outdoor rating tops off the functionality making this a nice solution to a number of design needs.



http://www.citytheatrical.com

Clay Paky

Distributed in the US by ACT Lighting, Clay Paky had the world premiere of theirSHARPY PLUS. TheSHARPY PLUS is the first true 100% HYBRID unit, able to be a beam light and a spotlight.

The SHARPY PLUS uses the new, Osram Sirius 330W X8 lampand weighs only 47.6 lb. Its body is slightly larger than the Sharpy's, to house an updated optical unit featuring a3° to 36° zoom range. The SHARPY PLUS has two independent operating modes.In BEAM mode, the aerial effects are enhanced by the way the Sirius lamp is made. It is capable of extraordinary power output (over 300,000 lux at approximately 30-feet), which the optical unit enhances through a marked hot spot.In SPOT mode, the light is diffused for creating visual effects can be projected with uniformity. Its3° to 36° (1:9) zoomcoversthe entire rangelinearly, both in spot mode and in beam mode.

AXCOR SPOT 400
The Axcor Spot 400 provides the medium-power applications with a compact, bright, LED moving spotlight, complete with every device you need for exceptional projected visual effects. Featuring 2 rotating dichroic glass gobo wheels, with a total of 14 rotating gobos, an animation disc, a rotating prism, a power-driven iris, and a 16-bit dimmer. In addition to these, it features highly advanced color management tools based on a CMY system with linear CTO and a 6-color wheel. Another outstanding feature of the Axcor Spot 400 is the incredible 5.5°- 55° zoom, with an extremely uniform light distribution at every beam aperture.

AXCOR PROFILE 400
Axcor Profile 400 is packed with advanced lighting, mechanical, and electronic features like:


  • 300W white LED module

  • 6°-42° linear Zoom

  • CMY+linear CTO+6-color wheel

  • An effect section with animation wheel

  • Patented framing system, mechanical iris

  • 16-bit electronic dimmer


Featuring an extraordinarily compact body,it is extremely quiet, and has three operating modes, which can be chosen according to needs: Silent, Standard and Auto.

AXCOR PROFILE 600
Featuring a 500W white LED engine, Axcor Profile 600 has a 5.3°-47.2° zoom (1:9 ratio), a complete color system, an effect section with animation wheel, patented framing system, and mechanical iris, and a 16-bit electronic dimmer.The luminous efficiency is among the highest for this power category, and can be further increased by about 25% if necessary thanks to the exclusive “boost mode”.

Axcor Profile 600 and Axcor Profile 400 are offered in two models: one that enhances the high light output or alternatively a model featuring very high color rendering (CRI = 90).

HEPIKOS
The Hepikosis an innovative Hybrid Wash/Beam light that combines low power consumption with color quality, in a highly compact body. The light is built around a bright 440W Osram discharge lamp, and features a 5-40° zoom, CMY color mixing, two color wheels. Thanks to its 185 mm diameter plano-convex front lens and its narrow 5° beam angle, it can produce a sharp, full-bodied beam, which may be used for striking aerial effects with saturated colors.



https://www.claypaky.it

Clear Com

FreeSpeak II is a five-channel, full-duplex wireless intercom solution, ideal for large-scale, complex designs or specialized applications–requiring team members to be untethered and talking in independent channels of communication. After years of field experience and refinement, FreeSpeak II has become the de facto standard for wireless intercom operation in the 1.9GHz and 2.4GHz band across various markets. The exceptional RF performance and reliable connections across the system give users the peace of mind they need for staying connected at every major event, programming, stage performance, critical or mass area operation.

https://clearcom.com/

Coemar

Coemar was highlighting their Phantom Fresnel/ PC fixture. This unit is available with three different LED arrays: Tunable Daylight, Variable White, and Full Spectrum (Red, Green, Blue, Cyan, Lime, and Amber). The fixture is DMX/ RDM controlled with a motorized zoom from 14-84 degrees, 3 selectable dimming curves (exponential, logarithmic, and linear), and 4 fan settings (low, auto, studio, and DMX regulated). The fixture is targeted at both entertainment and broadcast applications.

They also showed their ReLite LED retrofit. This bi-pin based module is designed to extend the life of existing stocks of 1K and 2K Fresnels by converting them to LED. Currently available in a Tungsten (3200K) or Daylight (5600K) color temperature, the retrofit is compatible with Triac or IGBT dimmers over a dimming range of 2-100%. Sources are 90CRI/ 160W or 97CRI/ 115W COB LEDs in a module that integrates the driver and fan and is supplied with an adapter to fit the existing lamp socket.

http://www.coemar.com

Dazian

Dazian’s new product, Stretch Shapeswhich are constructed from IFR Trapeze® Plus fabric and can be reused with no puckering or bagging. They are machine washable, fade resistant, durable and easy to install. Ideal for Theatrical, Event, Retail and Commercial environments.


Their new Vector HD Tiles are multi-faceted, dimensional surfaces that create unique visual effects available in chrome and white. These innovative 3-dimensional tiles really “pop” when used with theatrical LED lighting. Velcro to one of their CD2 modular frames or glue to a wall.


https://www.dazian.com

DeSisti

DeSisti has updated and expanded their well-regarded SoftLED Series of fixtures with the SoftLED 1XL, SoftLED 2XL, and SoftLED 8XL. These fixtures are a response to requests from Lighting Designers for wider, brighter sources and offer roughly double the output of the existing SoftLED 1, 2, and 4 fixtures. It is important to note that they are not discontinuing the existing fixtures to be able to offer a wider range of sizes and outputs. Fixtures are available in Tungsten, Daylight, or Variable White with Manual and Pole-Op fittings. The SoftLED 1 is also available in a track-mount configuration for smaller studios and briefing rooms.

https://www.desisti.it/

disguise (formally d3)

disguise Media Server systems have been getting a lot of notice this year in the entertainment industry. With tours like Taylor Swift, Bruno Mars, and The Rolling Stones it is hard for them to go unnoticed. However, media servers are no longer just for concerts and big events like the Grammy's. disguise media servers are also being used in Broadcast, Fixed Installs, and Live Theatre. disguise has built a reputation that has quickly carried them to the top of the industry. This reputation is built on two things: Rock Solid Hardware and a Community of Users. All of disguise's media servers offer 3D visualization and set up, stunning effects and robust programming features. The disguise product line is scalable from a single 4K output to as many as 16 outputs. And every media server is sold with formal training from disguise's dedicated support team. The collaborative nature of the disguise organization is what draws users with new ideas to them. They work tirelessly to include existing technology and add new technology to their software every day. A great example of this is their implementation of Notch, a real-time graphics generator which provides users with stunning visual effects. A second example is the collaboration between disguise and Black Trax, a 3D tracking systems which enables disguise users to project on any moving surface, object, or subject. New for LDI disguise introduced the VX 4 a new piece of hardware completely redesigned from the ground up. It includes:


  • 16 x 3G-SDI inputs (4 x 4K@60fps max)

  • 16 outputs via 4 x VFC Output Slots (4 x 4K@60fps max)

  • Support for 10-bit color and HDR

  • Network connectivity: 2 x 1Gb/s, 2 x 10Gb/s, 2 x 25Gb/s

  • New version 15 software


Also new for this year is OmniCal. Omnical is a system of proprietary cameras that allow end users to calibrate all of the projectors to their corresponding projection surfaces in mere moments instead of minutes or hours.



 

 

 

https://www.disguise.one/en/

Doug Fleenor Design

Doug Fleenor DMX DoohickeyDr. DMX has long been the go-to guy for all things DMX. His products are used industry wide for testing and stable reproduction of DMX Signals. But now we can also turn to the team at Doug Fleenor Design for all of our sACN & Artnet needs. New for this year is the DMX doohickey - the name is the only thing funny about it. This tiny device is designed to detect the address on channel 512 of a DMX universe. With hundreds of DMX universes available in sACN range people are beginning to identify them by parking channel 512 at the same value as the universe they are using. (universe #1 = channel 512 @1%) The DMX doohickey quickly identifies that DMX universe.

Preset 10 Ethernet Architectural - EthernetPreset 10 Ethernet is a new 10-button station for Snapshot Capture and Architectural Playback of up to four (4) universes of DMX. These universes are collected from the sACN stream via RJ-45 with support for POE switches. Multiple stations may operate on the same network. Also new for this year is the 8 Channel Ethernet to Analog Interface. This device will accept sACN or ArtNet protocols and convert them into 0-10V outputs for control of analog equipment and lighting. Another product that has made the jump from DMX to Ethernet-based protocols is the famous 1 Channel Relay Pack. This product is used to quickly control the power to simple devices such as fans, hazers, projectors, practicals, and non-DMX products.

http://www.dfd.com

Doughty Engineering

Doughty continues to expand the compatibility of their Space Saver Omega clamp. This unique folding option can be used with Chauvet, Clay Paky, Elation, Martin and Robe products. Made of high tensile strength aluminum, these brackets allow for many styles of clamps to remain attached to the fixture within its case.

Also of note was Doughty’s Modular Rigging System. Using sets of drop arms, t- bars and stirrup hangars, anyone can quickly assemble a custom lighting tree or lighting ladder within minutes. With the large line of Doughty clamp solutions, this system can easily be hung from a truss, permanently installed, or fashioned into a floor standing assembly.

http://www.doughty-usa.com

Elation

Elation also had a couple of very powerful IP rated fixtures as well as a couple of console surprises.

First up, the PIXEL Bar LED IP, which comes in three varieties—30 IP (.5 meters), 60 IP (1 meter), and 120 IP (2 meters) with a rating of 65. Each fixture has the noted number of LEDs, a 120-degree beam angle, and an outstanding refresh rate of 44,000Hz for flicker-free operation. Each fixture can be connected together with the built-in magnetic end caps and have an adjustable mounting bracket, square and round frost attachments and a safety cable loop. These fixtures are able to communicate over Kling-Net, ArtNet, and sACN. The units receive power and data through rated IP 4pin cables and can be purchased in varying lengths between 2 and 50 meters. Control for these bars is through the Pixel Driver 4000, which allows for simple onboard control and full pixel mapping. The Pixel Driver has 4 outputs and also allows for multiple control units to be linked together through RJ45. The unit allows for a maximum of 4,080-pixel mapping through Kling-Net or 680 max through Art-Net and sACN.

The Artiste Van Gogh is a 16,000 lumen 380W LED wash fixture with a 16bit CMY color mixing plus CTO and a dedicated UV filter. Unlike most wash fixtures, this fixture includes a 4 blade internal barn door and an optional Fresnel lens which increases the zoom range from 7-55 degrees to 11-66 degrees.

The Artiste Monet is at the top of the class with a 950w 6,000K LED engine, emitting a powerful 45,000 lumens. This fixture contains not only CMY, and CTO, but also has RGB flags for even more intense color mixing. One of the more interesting features is the High CRI Filter that boosts the CRI from 70 to 82. Some of the Monet’s other features include 360-degree framing shutters, 7 rotating and 7 fixed glass gobos, animation wheel, 4 facet and linear prisms (rotating), Light and heavy frost, motorized iris, and zoom from 6 to 50 degrees.

Another exciting new fixture from Elation is the Rayzor 760 wash effects unit. This fixture features the new patent-pending technology called TwinkLED—28 white LEDs placed in the lens of the fixture to allow for visual eye candy. The Rayzor has 7 60W LEDs for 8,000 lumens of output and a zoom range of 5 to 77 degrees. This RGBW fixture also has CT presets from 2700k to 8000k, with 16bit dimming.

Finally, the Smarty Hybrid boasts all the qualities of a moving light—wash, spot, and beam. With a lumen output of 11,000, this fixture takes it to the next level. The lamp for this fixture is a Philips MSD Platinum 200 Flex lamp with “FLEX” technology—a technology designed to use a discharge lamp and ballast package to “produce high output and compact performance”. In its various beam, spot, and wash modes it has a 1 to 18-degree zoom, a 3 to 27-degree zoom and a 5 to 33-degree zoom. Also included in this fixture is CMY color mixing, CTO, CTB, UV, and 13 dichroic colors including a quad-color filter. There are 8 fully rotating and interchangeable glass and 12 static gobos, as well as a 16 facet and 5 facet linear rotating prisms. Last but not least, this fixture also contains Elation’s own E-Fly internal WIFI transmitter for wireless capabilities.

Recently purchased by Elation was the Martin M series consoles. These consoles have been rebranded under the name Obsidian. While some of the consoles still exist under the old name, there were two consoles that were presented under the new name: Onyx NX2 and Onyx NX Wing.

The Onyx NX2 console contains a full HD touchscreen, 8 encoders, full keypad and command buttons, with 4 assignable buttons, a single grandmaster and 10 full playbacks. This Windows 10 based system also contains 64 universes out of the box—without any external hardware needed. Other specifications include 2X External 4k touch displays, 4 DMX ports, MIDI, and 5 USB ports (1 @ 2.0).

The Onyx NX2 Wing is the control surface for the ONYX platform. This allows you to run ONYX on any PC platform and control your rig over USB connection. This wing includes a fully unlocked license of 128 universes. Key features of this item are: 4 DMX ports, MIDI, 10 playbacks, 4 encoders, and keypad.

elektraLite

elektraLite exhibited this year at LDI with updated versions of theirStingray Profile 4‐color with a newly designed 250 watt COB LED. The ellipsoidal provides the same clean, rich, beautiful light audiences have grown accustomed to, making the Stingray Profile 4‐colorideal for any show or event. The built‐in accessory clip and included color frame allow for diffusion and color media to be used. Features include:


  • single COB 250 watt LED giving rich, vibrant RGBW light with no hot spot.

  • 100% no step dimming and no pop or bump at beginning or end of dimming curve.

  • 19-degree lens installed. Available 26, 36 and 50 lens tubes with no chromatic aberration. Also fits existing lens tubes from other manufacturers.

  • double slot gel frame holder with safety clip for accessories and supplied gel frame

  • exclusive “cool to touch” housing features rotating barrel assembly, rear handle, pattern holder slot, and four shutter blades for perfect in‐focus beam cuts.

  • easy to use display menus for DMX or static control

  • on/off switch and Powercon in and out connectors, 5‐pin XLR connectors in and out


The elektraLite Fresnel is a newly designed 300 watt COB LED. With a balanced 3,200K or 5,600K color temperature, and a CRI of 94 with amanual 15 to 50-degree zoom.

A very simple to use onboard control interface allows for easy control by either DMX or console‐free static operation. The elektraLite Fresnel has 5‐pin XLR DMX connectors (both in and thru). A single yoke, safety eye bolt, and safety cable are included. Power is via industry standard Powercon in and out connectors allowing for quick daisy chaining of the fixtures. Exclusive “cool to touch” housing makes this fixture a whole lot in a small package.

myelektralite.com

ENTTEC

ENTTEC’s Pixel Octo is an 8-Universe DIN pixel controller, which allows you to drive up to 1,360 pixels without compromising the refresh rate. The Pixel Octo allows you to create and edit presets via virtual faders, has a web interface, and is DIN-rail mountable. It also features an accessible reset button, ArtNet, sACN, KiNet, and ESP protocols, and Direct and Preset modes. It uses a single power supply and takes variable input from 5V-60V.

 

The PT1-13 DOT is a direct-view RGBW light for high-output day and night visibility in both indoor and outdoor conditions. Rated IP66, it’s built for harsh conditions and offers a multitude of mounting options. It goes up to 20W / 1200 lumens and features a Black PCB with three diffuser options. Available in 16-bit or 8-bit smart LED dimming and comes with a 3-year warranty.

The S-Play is ENTTEC’s next generation Smart Player that combines all your show needs into one product. It allows the user to create, set, and record shows using a user-friendly web interface is easily rack mountable and features an onboard LCD menu and SD card reader. It has 2 universes of DMX output, and supports ArtNet, sACN, and DMX Data In and Out, as well as PoE.

https://www.enttec.com

ETC (Electronic Theatre Controls)

The Relevé Spot from ETC brings the color quality, control, and consistency of the ETC LED product lines to the automated lighting world. Relevé builds on the legendary color control of ETC’s LED products and provides a reliable, full-featured automated fixture of the highest quality.



If you have an under-utilized space that is crying out to be turned into something amazing, ETC has a product to help you do just that. Prodigy FlyPipe is a compact, budget-friendly, zero fleet, self-climbing hoist that requires minimal structural support. This means you can add lighting, sound systems, projection, and other theatrical elements to spaces previously overlooked. Combine this with ColorSource raceway and you have a complete and diverse package.





https://www.etcconnect.com

Fiilex

Fiilex displayed it’s Q8 Travel, a 340W tunable LED Fresnel. It’s precisely designed 8” Fresnel lens produces a smooth light field at all beam angles (12-60°).

The Q8 Travel includes three other key features that address the needs of many film and video productions. First, the tunable CCT and hue enable the Q8’s output to blend seamlessly with existing lighting. Second, the robust construction ensures that the Q8 can withstand rough transportation and rigging conditions. Third, the intuitive LCD display and manual control knobs allow filmmakers to make quick adjustments on set.

With 48V DC battery compatibility and a weight of only 16 pounds, the Fiilex Q8 Travel is a great LED lighting fixture for on-location use.
FEATURES:
- 340W power draw
- Unmatched focus/flood range of 12-60°
- Smooth dimming down to 0%
- Flicker-free at any frame rate
- IP-24 Rating (water-resistant)
- Tunable CCT (2800-6500K)
- Hue control (±0.25 green/magenta)
- High CRI at any color temperature, 97 typical.
- Broadband full-spectrum LED source
- Designed in the USA. Assembled in USA/Taiwan

Filex also displayed The Matrix II RGBW. This fixture brings full-color control to Fiilex's Matrix line of soft-source LED punch lights. The Dense Matrix LEDs in the Matrix II RGBW boast multi-wavelength color groups.

The Matrix II RGBW fixture draws 340W of power and produces an output greater than a 1K tungsten soft light. This output is generated by the four Dense Matrix LED clusters that are set into a custom-designed reflecting chamber and enclosed by a layer of diffusion. With its four LED sources, the Matrix II supports additional optics and accessories that can easily reshape the fixture’s illumination. The fixture is compatible with light banks from Chimera as well as DoP Choice when using the speed ring accessory. It can also be used as a front-focused light with the optional Quad-Fresnel, which increases beam intensity by 3x.

The Matrix II is also available in an alternate Tunable White model. The Matrix II Tunable White and the RGBW both have an improved mechanical design, smoother dimming down to 0%, magenta/green hue adjustment, and tunable CCT (2800-6500K and 2800-10000K respectively).

The housing of each Matrix II RGBW fixture is constructed of high-grade aluminum along with ruggedized rubber at the impact points making them extremely hard-wearing and shock-resistant.
FEATURES:
- Full RGBW control
- Custom multi-wavelength LED groups deliver rich, bright color
- Smooth dimming down to 0% without flicker
- RDM/DMX512
- 5V/1A USB powers wireless DMX
- IP-24 weather resistant
- XLR power input compatible with 48V battery power
- Unique Fresnel accessory for increased punch
- Future-proof: the ability to upgrade firmware in the field
- Compatible with industry-standard softboxes and octabanks via speed ring accessory
- Extreme durability with high-grade aluminum housing and a ruggedized exterior

https://www.fiilex.com/

Gantom Lighting and Controls

Gantom Storm SeriesGantom has brought out their new Storm Series of fixtures and cable. The fixtures and cables are IP65 rated and include four of their most popular types.


  • Storm Z – Micro Spot Light / Floor Light

  • Storm DMX DW – Dynamic White Spotlight / Floor Light

  • Storm DMX RGBW – RGBW Spot/ Flood Light

  • Storm Form – Profile Spotlight


Cables for the Storm series are their PRO Cable line of 5 conductor cable with IP65 rated connectors and carry fixture power and DMX to each light. Cables are available in standard lengths of 2m and 5m and custom lengths are available.

Gantom also offers a T Connector that allows up to 72 Storm Z fixtures, 24 Storm DMX or 12 Storm form at the 24V input voltage.

For indoor applications, Gantom recommends their G8 Distribution box and Pro Cables.The G8 will distribute DMX and power to 8 fixtures and comes in a variety of options for hard wired connections or plug and play models.

http://www.gantom.com/

GLP (German Light Products)

GLP returned to LDI this year to continue showing off their impressive X4 fixture family.

Debuting this year are several new products. In the Moving Light family, the Impression E350 and S350 are supercharged with a white LED engine and baseless design. Both fixtures are extremely quiet, and the S350 features a 90+ CRI and framing shutter system.

New to the GLP line at LDI this year are the KNV LED system. The KNV Cube and KNV Arc both feature a 5x5 grid of LED pixels. The KNV family is a multi-use Strobe/Audience Blinder and Pixel fixture. Both fixtures fit together seamlessly and modularly, and both fixtures have a 5x5 LED grid so continuity of light is guaranteed.

Also featured was the Cosmic truss Helix style truss-featuring a double helix design, the helix isn’t just decorative-it can be used for both structural and aesthetic purposes.

https://germanlightproducts.com

Green Hippo

Hippotizer 4.4 has a new release with new features; these include Crossfade on layer and VideoMapper on layer, making show programming faster and easier. Other new features released include; Key on layer, frame-based work flow, 2nd effects Engine on the mix, Stream Deck support, UV editor in SHAPE and visibility controller in SHAPE.



www.green-hippo.com

Harrington Hoists

Harrington Hoists has been manufacturing lifting equipment since the 1800’s. In recent years they have moved into the entertainment market with their TNER Series of theatrical chain hoists. These fixed-speed hoists are available in ½-ton, 1-ton, and 2-ton capacities in industry standard configurations for speed, connectors, and controls. They also meet the BGV-D8 standard. Hoists can be run motor-up or motor-down. Harrington also offers a variety of manual hoisting devices along with beam clamps and chain for overhead lifting (and yes, it’s available in black).

https://www.harringtonhoists.com

High End Systems

The SolaFrame 3000 combines unprecedented light output from its 1000 watt Ultra-Bright White LED engine with a limitless palette of effects and color possibilities. Boasting more than 37,000 lumen output, the SolaFrame 3000 is the first automated LED luminaire to rival and even exceed the output of the most powerful arc lamp fixtures. The fixture is also available in a Hi-Fidelity version with incredibly accurate color rendering.



Also on display was the upcoming TurboRay Effect and wash fixture. This dynamic fixture is perfect eye candy for multiple applications.



https://www.highend.com

Interactive Technologies

Interactive Technologies introduced the Insite, a 7” Touchscreen which acts as a front-end for their CueServer line of controllers. The Insite mounts in a standard 3-gang backbox and can be powered via PoE or 12v DC. The system includes simple, easy to use software to configure buttons, sliders, a color-picker, and other common touchscreen elements. Once you have laid out the station design you then associate CueServer commands with the controls via the CueServer Studio software. The system can also be accessed via a web-interface for expanded remote control.

https://interactive-online.com

James Thomas / Tomcat / Area 4

TOMCAT’s new Zig-Zag Truss combines the advantages of Pre-Rigged Truss with a hinging spigot design that allows folding of the truss system over itself for efficient storage/travel and trouble-free unfolding via vertical lift and pinning applications. The Zig-Zag Truss can be used in both vertical and horizontal lighting applications.

The TOMCAT Lighting Pod offers lighting designers a larger area to work with and affords them the opportunity to create “walls of light” on a much larger scale than traditional truss profiles can accommodate. Lighting positions can be adjusted forward and backward within the pod. This allows for the use of multiple lighting options within one framework that can be utilized both vertically and horizontally.

https://www.areafourindustries.com

Johnson Controls

Johnson Systems launched a new LED Dimmer as part of the upcoming Presidor line of control products. The LED dimmer is designed to be used with CD-2000 SV or CD-3000-SV retrofit processors and allows the user to set the dimmer curve for the LED to be controlled, a very handy feature in today’s LED house light fixture market. Coming in 2019 is a new Presidor retrofit processor and house light control station.

http://www.johnsonsystems.com/

Kino Flo

Kino Flo Systems displayed their LED tubes specially designed for operation in 4Bank, Double and Single fixtures and for stage design lighting.

The new FreeStyle LED Tubes display white light and RGBWW via the color management system found in the FreeStyle 41, 31 and 21 LED portable



systems, the Diva-Lite LED video field production lights, and the Celeb 850, 450, 450Q and 250 premium studio soft lights.

Paired with a 4Bank fixture’s light intensifying reflector, the tube projects soft light forward at a 100° beam angle at about the same light levels you’d get from a 1,000W tungsten soft light.

Outside its fixture, a bare tube glows like a traditional Kino Flo lamp, with light radiating on all sides. The lightweight tubes can be taped to a set wall, customized to form arrays in soft boxes or hung as “ladders” of light for illuminating stage backdrops. A narrow aluminum rail built into each LED lamp expands the mounting options for special lighting designs.



They offer a wide range of light control features: White Light mode, with Green/Magenta selection; Cinema Gel mode, with 115 industry standard filter colors, and a full Hue & Saturation color system; RGB mode; and a Visual Effects mode, boasting easy to use flash and strobe programs such as simulated “Candle Light”, “TV Flicker”, “Police”, “Paparazzi” and more.

The new FreeStyle tubes are operated by solid-state drivers featuring built-in wireless DMX and standard DMX controls, 8-bit and 16-bit dimming, linear and square dimming, internal/external wireless antenna selection, and more.

https://www.kinoflo.com/

Lee Filters

Zircon filters have been on high demand Lee has expanded their options and have a separate swatch book and also packs. Cool LED, Warm LED, & LED Correction. Zircon offers longer life for LED lighting and has been shown to retain at least 80% of their effectiveness after as much as eight months of continuous use on LED downlighters. Manufactured using a 180-micron material they are more than double the thickness of a normal lighting filter. They come in rolls of 10ft. x 4ft., and Pre-cut sheets in 24” x 24”.



http://www.leefilters.com/

LeMaitre

As always, multiple machines were out and on display so that you could actually see the different formulas in use. The key displays in the booth were the G300 Smart and the MVS Smart. On the update to this popular line is the fact that you can eliminate the separate remote. Both Smart fixtures now feature an onboard, redesigned control panel with an easy to read backlit display for improved user interaction. The G300 Smart, of course, keeps the massive smoke output. The newer interaction capabilities feature DMX in and out, 0-10V in, fluid level sensing, wireless/LAN connectivity. This is user programmable for duration, interval, and pre-chill time for FreezeFog Pro triggering. The connectivity feature offers monitoring and control locally or over the internet, via Le Maitre’s evolving Machine Interface Portal. The MVS Smart features onboard DMX 512 and sACN support. This fixture also offers Wifi/Ethernet connectivity for setup, control, monitoring, and diagnostics. The fluid level sensing is available on this as an option.

http://www.lemaitreusa.com

Lex Products

Lex Products continues to showcase their PCS TRIO installation line. The PCS Trio comes in 4-, 8-, and 16- module cabinets, and can use any combination of their 6 dimmer/relay card modules. Each module hold’s up to 3 circuits of dimmed power or relay control. The PCS Trio system enables users to power a wide range of devices in a single panel, and also integrates seamlessly with other power control and management products in the PCS family. PCS Trio is available in both installation and touring models.

Lex also continues to improve their PowerData Cable line, featuring power and data in one insulated sleeve. Any combination of power connectors (Edison, Stage Pin, Powercon, TrueCon1) and 5 pin DMX in one piece helps cut down on running multiple cables in crowded locations.

Also of note, molded Powercon>Truecon 1 adapters. (Who hasn’t tried to daisy chain multiple fixtures with both Powercon and Truecon1 connectors!)

http://www.lexproducts.com

Lightronics

Lightronics was back at LDI and debuted three new fixtures.

The FXLE17C4N RGBW Ellipsoidal Lighting Fixture is available In 19, 26, and 36 degree beam spreads (no 50) and has a 170w 4 in 1 Quad-Color RGBW, CREE array and the white is tuned to 6000K. The housing is high impact plastic and at 14.2 lbs, it is a fairly lightweight LED ellipsoidal. The fixture is compatible with lens tubes from "other manufacturers".

The FXLE2032W200 Watt warm white LED ellipsoidal lighting fixture is available In 19, 26, 36 and 50 degree beam spreads and has a COB 200w Warm White LED engine. Likeother FXL fixtures, the housing is high impact plastic and is also 14.2 lbs. The fixture is compatible with lens tubes from "other manufacturers". Both the above fixtures are only available in 3 pin DMX in/out.


The last fixture in the FXL line is the FXLF2032W1555LED Fresnel.This LED Fresnel features a 15°-55° motorized zoom. It has 1- COB 200w, 3000-3200k LED. It is availablein 3 pin or 5 pin dmx.


http://www.lightronics.com

LiteGear

LiteGear MirageMirage 400i – A VFX-oriented fixture that focuses on producing high-quality Hybrid and Blue/Green Screen light. It is a retrofit to existing Kino Flo® Image 80/85/87 fixtures in which a flat panel with an array of tungsten, daylight, green, and blue LEDs is affixed to an Image 80/85/87 housing using four thumb screws. The Mirage Hybrid output benefits from the addition of the blue and green emitters in that Planckian Hybrid output can be achieved, allowing the output to follow the Planckian curve from approximately 2600K to 11000K. Mirage is controlled by one of LiteGear’s most advanced dimming controls to date, and the entire Mirage system – assembled completely and left intact – fits perfectly into existing Image 80 cases.

The new LiteGear Cinema Series of LED LiteRibbon is an applied phosphor LED. With staggering CRI and full-spectrum output, the Cinema Series is 40% brighter than the previous VHO Pro LiteRibbon. This all-new LiteRibbon proudly joins the LiteGear Cinema family of unified color-space products including LiteMat S2, LiteMat+ Plus, and LiteTile+ Plus.

Studio Series LiteRibbon – The new LiteGear Studio Series of LED LiteRibbon is an affordable, color-correct, studio-grade material designed for high volume installations across multiple departments. This readily available LED lighting solution guarantees a matching color space and rock-solid reliability from the brand you can trust.

LiteMat+ Plus 8 – This is the largest LiteMat in the product line. Measuring nearly 4 feet by 4 feet, LiteMat+ Plus 8 provides 400 watts of Hybrid light from 2600K to 6200K all on one stand. Kits will include all of the typical accessories including skirt, diffusers, and an all-new LiteDimmer+ Plus power unit

http://www.litegear.com/

Lycian

This year Lycian had a range of options available to see up close and personal. They brought some of the long-standing favorites including the ClubSpot 7.5, Zot LED, Zot 1.5, SuperStar 1.5, 1290 2K Xenon, and the 1295 ELT with the 4K lamp. In addition to the long-standing favorites they also had 2 brand new options that will soon be available on display: the SuperStar LED and the SuperStar 17C.

The SuperStar LED is a 600w LED follow spot with the options that our industry needs. It offers a 7-15-degree beam angle, an internal electronic flicker-free power supply, trombone for variable focal optics, ultra-smooth mechanical dimmer, fine focus to soften and harden the edge, an internal 6-color boomerang, and a quiet cooling fan. The SuperStar LED offers brilliance and a clean beam all while running comfortably cool.

The SuperStar 17C, like the others in the SuperStar line, offers optics with a well thought out design and intelligently clustered controls making the follow spot operators show control more streamlined. Optically, the 17C offers a faceted dichroic glass reflector, single lever variable focal optics, rapid focus mechanism, dichroic and frost rings, and the Lycian produced nichrome iris. Other features include an ergonomic control cluster with iris and fader and an internal 6 color, self-canceling boomerang for optimal balance. This fixture is supplied with the folding 3 leg base with locking casters and integrated leveling jacks. The easy access to the followspot interior is also worthy of note making the maintenance much less of a headache.

And as always, both of the newest followspot options from Lycian, like the rest of their fixtures, are “Made in New York, by New Yorkers, with a couple of guys from New Jersey and Pennsylvania.”

http://www.lycian.com/

Lyntec

LynTec was showing their new line of Xtend Power Control (XPC) remote relay modules and standalone controller.

LynTec’s new XPC remote relay modules extend beyond the traditional reach of the company’s relay panels and motorized circuit breakers. Enclosed in a metal cube, they can be placed anywhere imaginable: in the rack, on rigging, behind line arrays, or anywhere equipment is located. Each module contains an electrical connection, a power plug, and an Ethernet port. Integration is simple and straightforward: Connect the module to a power source and the network, and then plug in the equipment that needs power control. Using LynTec’s IP-based GUI, users can set up and customize the control and sequencing for each device. The family includes:


  • XRM 20 Relay Module: a standalone 20-amp cube enclosure with two independent relays to control the two onboard duplex plugs.

  • XRM 30 Relay Module: a standalone 30-amp cube enclosure with a single relay switch that controls a single 30A L5-30 receptacle.

  • XRS 20 Rack Sequencer: a 1RU rack-mounted enclosure powered from a 20-amp circuit to provide control to three duplex receptacles, each of which has its own relay switch for onboard sequencing.

  • XRS 80 Rack Sequencer: a hardwired vertical rack-mounted strip that can manage up to four 20-amp circuits that power four corresponding duplexes, each with its own relay switch to provide onboard control.


The XPC standalone controller offers LynTec’s trusted RPC control solution that previously was only available in LynTec’s RPC series motorized circuit breaker panel, RPCM mobile distro, RPCR wall-mounted relay panel, or NPAC rack-mounted relay panel. Now customers can take advantage of all the capabilities and features of the popular and time-tested RPC controller they’re already familiar with but in a standalone 1RU rack-mounted enclosure. This eliminates the costs of purchasing preconfigured controllable circuit breakers or relays while providing customers with a way to operate one or more remotely placed relay modules spread out over an extended area or venue. Easy to set up, operate, and maintain, the controller can control lighting and AV systems across multiple control zones and protocols and offers customizable step rates and delay settings for sequencing, load shedding at the circuit level for emergency off, auto-on for egress lighting, a built-in timer for automated control, and more. In addition to onboard control options, the XPC controller can interface with any third-party control system that communicates with Telnet, HTTP, DMX512, sACN, or contact closure signals.

LynTec also demonstrated their the ready-to-install NPAC rackmount power management solution. It is the only rackmount solution of its kind to sequence on/off complex digital audio systems with easy-to-program extended step rates and time delays that guarantee proper component boot-up and shutdown automatically. NPAC is available in two models: 120V or 240V, and features four 20A circuit inputs in a single 2RU enclosure — saving valuable rack space over 4RU systems and eliminating the need to wire multiple units together.

The new XPC line is expected to ship starting in December.

lyntec.com

MA Lighting

MA Lighting had on display the new grandMA3 systems, capable of outputting up to 250,000 parameters. There are three sizes of processing units to expand the console parameter count. The full-size and light models feature a huge multi-touch screen surface area. All dedicated encoder and playback information is accessed directly on the letterbox screens allowing the larger screens to be fully-configured to suit user needs.

grandMA3 breaks the limitations of Local Area Networks (LAN) with the ability to access Wide Area Networks (WAN). The grandMA3 control software utilizes a flexible new fixture concept, developed to replicate the real-world physical components of the most complex fixtures. Fixture information is now generic and allows simpler sharing of programmed data between fixtures. MA Lighting supports the new GDTF (General Device Type Format) protocol natively, allowing fixture manufactures to ensure their own fixtures are controlled as intended.

The grandMA3 consoles feature Dual Encoders, for which feature-mapping is customizable. Long-life motorized playback faders are used also across the entire grandMA3 console range. The faders incorporate a color-changing light pipe on all models except onPC command wing. All playbacks have direct access to button pushes as well as intensity and timing changes via new rotary RGB backlit encoders. The almost-silent buttons feature low travel and have a positive actuation-point.

The grandMA3 software features an integrated 3D visualizer for the ability to manipulate and playback basic media content directly from within the console. Dynamic effects are no longer restricted to just two-step modulated parameters. The grandMA3 software has a new effects concept allowing multi-step effect sequences to be nested inside a cue or preset.

https://www.malighting.com

Martin by Harman

Not on the show floor, but in a demo room Martin showed their new Rush MH 10 Beam FX with a 60W RGBW LED with an independent, built-in LED ring of 24 individually-controllable LEDs surrounding the main beam lens.

This fixture has tight beam effects using a collimator lens design. The engine is an Osram Ostar LEDs that can create color mixing compatible with MAC Aura, RUSH MH 6, and Rush Par 2 fixtures.

Other handy features include:


  • continuous pan and tilt (540°p and 270°t)

  • Preprogrammed effects

  • Electronic shutter

  • 0 to 100% dimming,

  • virtual color when with 33 color presets

  • virtual color wheel rotation effects

  • random color.


The MAC Allure™ Profile features a novel RGBW light engine with unique 7-segmented beam control. With instant color control and pixelated beam, the MAC Allure Profile enables dynamic projection and mid-air effects, previously not possible. The proprietary light engine sets new standards in compactness and efficiency, previously associated with larger, costlier fixtures. To ease programming and content creation, this is also the first lighting fixture to incorporate Martin's P3 control. The pixelated beam can still be controlled or pixel-mapped via DMX and Art-Net protocols, however, switching or cross-fading to P3 or vice versa is now instantly possible.

 

Another interesting item from MartinMartin ELP CL (Color) LED ellipsoidal fixtures deliver the class-leading luminance, output and vivid color rendering that you’ve come to expect from Martin. Ergonomic Danish engineering offers advances in lighting functionality that include the highly efficient gear-based Fine Focus—an industry first; and Fast Focus which allows focusing of the fixture without data flowing to it. ELP also offers 16-bit dimming with 4 selectable curves and 26 color presets that match industry-standard color filters. ELP fixtures can be configured with one of four Martin lens tubes in 19, 26, 36 and 50-degree beam angles and are compatible with third-party lens tubes along with a wide range of accessories including gel frames and gobos for flexibility in lighting design and inventory management.

The fixture is also available in ELP-WW or Warm White.



martin.com

MDG

MDG Me1g foggerIn the ACT Pavillion, MDG's new Me1g is a glycol-based version of their popular Me1™ fog machine. The Me1g,like the Me1oil-based version, is a single nozzle fogger that can be controlled with DMX/RDM and utilizes the array of MDG’s glycol-based fluids.

The Me1g is for use when quick dissipating fog is needed.

MDGalso introduced their new range of weatherproof fog and haze generators. 0-100% output can be controlled from your DMX / RDM device or direct local control; via 4-button LCD user interface, 3 standard USITT DMX512 channels, and XLR-5 connectors. The system purges the heating module after the first heating cycle and after every emission of haze preventing residual build-up and clogging.

The ATMe WPE is the weatherproof version of the ATMe haze generator. With its weatherproof and dust-resistant enclosure, this IP55-rated WPE version is ideal for outdoor use. It features low noise emission (at 1m/3.3ft): 45.4 dB in standard mode. The theatre mode reduces the fan speed depending on haze output level. At 1.38 bar (20 psi)ATMeuses only 55 ml (1.86 oz) of fluid per hour to give a total running time of 46 hours from its 2.5 L (0.66 US gallon) reservoir.

Me1 WPMe1 WPE is the smallest in the family of fog generators, now available in a weatherproof version. With its single nozzle, the maximum fog output is 100 m3(3,531 ft3) per minute. At maximum output (2.76 bar / 40 psi)Me1uses only 1 L (0.26 US gallon) of fluid per hour.

Me2 WPE is the more powerful twin of Me1 WPE, housed in the same weatherproof enclosure but with twice the power. With its two nozzles, the maximum fog output is 200 m3(7,063 ft3) per minute. At maximum output (2.76 bar / 40 psi)Me2uses only 2 L (0.53 US gallon) of fluid per hour.

http://www.mdgfog.com/

Mega Systems / PR Lighting

Mega had an assortment of products at the LDI 2018 including some from PR Lighting.

Circa Scoop LED, is a new and unique fixture with four elements that can be used in various applications. It has a lightweight housing and it features a variety of components. This product can be used for concerts, houses of worship, theaters, and clubs. It has a 45WW and Amber LED located in the center of the unit which creates a nice and warm sunset effect. The “Reflective Pattern Ring” has an additional 87 WW LEDs, which creates a nice soft-edged effect to any setting. It also has an Inner Ring which has 144 RGB LEDs, 8 segment control and the capability to control the macro speed and dim down different colors enabling it to set a wide mixture of colors. The Outer Ring also has 8 segments and is equipped with an extra 192 RGB LEDs that illuminate a 140º angle. It can produce multiple color combinations and the ability to create authentic looks that can be used as dazzling eye-candy effects.



Spotbot LED CYM 300 a new affordable fully loaded it and all-purpose moving head. It has a 300W LED engine that produces a bright and powerful projection. It has a 7-degree to 31-degree zoom range that allows the unit to provide versatile settings. It has an 8 facet rotating prism, 10 fixed and 7 rotating gobos that allow morphing between the focus and zoom. It also offers the CYM color mixing allowing an assortment of color combinations. Perfect multi-tool robust, full-size fixture to have in your lighting gear. It is a multi-purpose lamp that can be used in large or small venues for concerts, clubs, and theater.

Washbot LED CYMK 300, has been designed to produce vibrant colors and defined shades of white. It is equipped with a 300W LED engine. The kelvin color wheel allows the user to adjust the color temperatures from 7300K – 3900K. Offering the capability to control various shades of white from bright cool to warm making it perfect for theater applications. It provides 3 CTO filters 47K , 35K, and 33K which allows more control of the white tones. This fixture also offers great color mixing with a smooth CYMK. It has the ability to create great color combinations and unique bicolor capabilities including a tricolor RGB grouping. It has been designed for stages, small and large venues and theater applications.

Drama FS-LED 800, a followpsot with a 350-W LED equivalent to an 800W lamp and brighter. It has the capability to be controlled via DMX or fader control on the back of the unit, with a manual focus and zoom from 7 degrees – 13 degrees. It has a color wheel with red, green, yellow, blue, orange and white for spotlight. It also has a CTO wheel with 3200K, 4500K, & 5600K adjustable color temperature. It has built-in iris great for longer throws that allows highlighting small objects on stage. A compact unit for easy transport and it comes with the stand PowerCon type connection.

Drama VW2, new to the line with a 97.1 CRI for professional theater market. It has a variable 250W white LED. This allows you to create a cool and warm white projection within one fixture. Color tempartures from 2709K to 6487K. The lenses not included with options available in 19, 26 & 36-degree barrels.

Drama Profile Q2, is part of the New Mega-Lite Drama Profiles series. It is a very bright and colorful fixture. This also has three different lens options 19, 26 & 36 degrees. It has a 250W LED, making it an even color fixture.

iCandy Q18, a new sleek linear IP65 bar for indoor and outdoor use, it allows you to create different looks for various applications. It has pixel control for effects and creating videos with pixel-mapping. It has a total of 18 RGBW LEDS allowing for customized and creative designs. The mounting hardware options include a single joint, star joint, sliding mount and center mount clamping.

PR Lighting:

XPar 150 unit, is an IP67 rated par with 150W LED, RGBW color mixing macro. 6 channels standard model and 12channels in extended mode.

Polaris, a compact IP67 fixture with 14 channels of DMX, DMX wireless, control, and extended mode of 39 channels, It features 7 x 15W RGBW 4-in 1 SMT Led lamp. It has a color temperature from 3200k – 10000k, and allows the user to control each pixel independently. It has a strobe effect with pre-set buttons for strobe pulse effect, as well as rainbow, wash, beam effects, and spot mode with an assortment of macros.

Aqua LED 600 Spot, is an IP65 moving head that can be used for outdoor and indoor applications. It has an LCD display and touch screen for easy control, with a total of 25 channels in short mode, and 31 channels in standard mode and 38 in extended mode. A 600W White LED, replaceable animation wheel, bi-directionally rotatable at variable speed. Modular structure for easy maintenance, Wireless DMX control, RDM, and Ethernet protocol.

XLED 3007, small moving head equipped with 7-20-Watt RGBW LEDS. It offers a punchy beam, the beam angles are adjustable from 7 to 42 degrees, which transform from a beam to a wash, individual pixel control, RGBW linear color mixing with macros, DMX linear zooming, wireless DMX, individual pixel control for creative effects, and endless pan and tilt.

Phantom 440, a new moving fixture offering a beam, wash and spot Hybrid effects. Equipped with a 440W HRI, Osram lamp, a fixed gobo wheel with 18 fixed gobos and one rotating gobo wheel with 7 rotating gobos, its own CTO channel, linear CMY color mixing with macros and frost filter, prism wheel with an 8 facet prims and 5 facet array that can create a variety of beam effects ideally for production applications.



Mega Systems also distributes their Mega View Mosaic LED video panel systems along with the complete line of RGB Link video processing tools.

megasystemsinc.com

OSRAM

This year at LDI, OSRAM presented three new SharXS lamps which OSRAM is calling Brilliant, after its High CRI Lok-it! Power Series lamps of the same name. Like the Lok-it! lamps, the SharXS Brilliant have a super-high color rendering index of 92-94, making them some of the best SharXS lamps ever for television and live performances with accurate skin tones and vivid, true colors are required. The new SharXS Brilliant lamps are available in wattages of 1000W, 1200W, and 1500W.

https://www.osram.com/els/

Pathway Connectivity

Vignette Slider StationAcquity's Pathway Connectivity has expanded the Vignette architectural controller series. They've added a three-slider station to their modular options, and it has the same functionality, fits into a single gang box.

They offer the Vignette Clock for time based functions and Astrologic adjustments for sun up sunset – DIN Rail Mount – POE powered or external 24-48VDC – Configure with Pathscape.

VIA 16 Port POE SwitchTheir VIA 16 is a larger version of their VIA-5 that has been on the market. It is a 16 port manageable switch Mounts on DIN Rail. It requires external DC voltage [20-50VDC] and provides 12 POE ports and 4 non-POE ports [10/100Mbit] 15W per port plus 2 sled slots for SFP Fiber modules [1000base LX or 1000Base SW].Settable properties include Switch Name, Port Name, IP Address, Subnet Mask, Default Gateway, VLAN configuration, Link speed, POE allocation, DHCP pool, IGMP filtering.

Keep an eye out for a VIA-8 in 2019 if you have smaller installations as we're told that's in the pipeline.

https://www.pathwayconnect.com/

Philips Color Kinetics

Color Kinetics hasrevamped the Reach product line to the ReachElite exterior long throw LED luminaire, available in three models the 100, 200 and 300 with a native beam angle of 2.6°, enabling the fixture to throw concentrated light with a high punch to distances up to 1,000 ft.

Also new this year is the redesign of the FlexElite, all the major elements from the form factor to the internal electronics. Sections click together and the modular design lets you create the exact configuration of the nodes to the exact needs of your project.

Philips Entertainment (Strand / Vari*Lite)

Now consolidated into one unit Strand and VariLite were showing as one company. New for Strand Lighting, the C21 processor revamp with better electronics, a new onboard RJ45 connector, no longer requiring a separate plugin location, USB data slot, updated menu and encoder wheel access to the processor menu.

Also for Strand the SPX LED, warm white LED profile spotlight launched. Designed to replace your conventional tungsten fixtures, this SPX is dimmable either via DMX, or your standard forward phase dimmer. It provides a smooth step-less fade right down to zero. The output is similar to a standard 575-watt lamp.

VariLite was showing the new VL10 BeamWash fixture, the first lighting fixture to use the Philips 25R platinum 550W lamp. The VL 10 BeamWash can produce 28,000 lumens of output and ranges from a 2.2 to 48-degree zoom. With Dual overlaying prisms, an eight-slot rotating gobo wheel, an aperture wheel featuring 12 designs, along with the new VL*FX glass animation wheel make this a powerful addition to your lighting arsenal.



http://www.lighting.philips.com/main/products/entertainment-lighting

Pro Intercom

New for Pro Intercom this year is the handy AD903 wireless interface adapter that they are partnered with Listentechnologies to create. The adapter hooks into one transceiver and the power supply on the intercom system tomake a wireless system. TheAD903has many functions for getting various levels of audio into an intercom circuit, or getting the intercom audio “traffic’ out to an amplifier or recorder.It is also useful as a 2-to-4 wire adaptor for connecting 4-wire communications into and out of a standard intercom circuit.
Both the input and the output are transformer isolated from whatever devices are connected. The wide range of level adjustments will accommodate almost any audio signal.


http://prointercomllc.com/

Quasar Science

Quasar Science's presencein the lighting industry started in TV and Film, but their products are finding their way into many other industry segments.

Quasar Science’s new Q-LION 3x1 kit features (3) of their Q-LION battery LED lamps (5”, 12” & 24”), plus (3) single chargers, (3) USB cables, (3) 3/8” Baby Pins, and the custom case and foam.

The need was there, and we've all been asking, so Quasar Science has partnered with Honeycrates to offer more accessories for their fixtures to control light direction and spill. This was welcome news to many grips and LDs.

To mount multiple tubes Quasar showed theirOSSIUM Linear LED Mounting System allows the user to combine multiple Q-LED lamps into large stacked arrays mimicking the panel form factor.Available in three sizes:

424 – Holds up to (24) Q50 lamps

412 – Holds up to (12) Q50 lamps

212 – Holds up to (12) Q25 lamps



Displaying 1 to 62 (of 76 Posts)
 1  2  Next →