1/2" Striplight Placemat 2010, the new Reference Manual in Plastic that's cutting down the time required to draft striplights onto a light plot. This template was unveiled at the USITT Convention in Kansas City in the spring of 2010. The New 1/2" Striplight Placemat 2010 is divided into all of today’s major strip food groups; LED units, such as Seledor, Color Kinetics, and Altman, not to mention tungsten-based units such as ETC Multi-Pars, R40 and Par 38s, MR-16s, T-3s, Par 56s, Iris and Far Cycs. And there’s information listing the actual size, weight, cut color, and circuitry combination for every single strip. The cutouts are all aligned on the patented Pro*Trak 50 system (Showing you the distance required between every strip). The printed portions of striplight on either side of each symbol are pre-measured distances to adjacent striplights from the symbol hole. So drafting two striplights becomes simple: Trace one striplight, slide the template sideways so that the traced symbol lines up under a printed portion, and trace the same symbol again. The two striplights are now accurately pre-spaced apart. Done is beautiful.